Our webstore uses cookies to offer a better user experience and we recommend you to accept their use to fully enjoy your navigation.

close

On sale

All sale products
Blog navigation

Derniers messages

PA 2500 R

8 500,00 €

T+A PA 2500 R

Exceeds the specification of the PA 2000 R in many areas, but its character in terms of sound quality is in no way inferior to its smaller sibling. 

Condition
New product
Color

Share

The Integrated Amplifier

Twice as tall, higher output power and even more connection facilities – the PA 2500 R exceeds the specification of the PA 2000 R in many areas, but its character in terms of sound quality is in no way inferior to its smaller sibling. This by no means goes without saying, because very powerful amplifiers often forfeit the finer points of dynamics and detail tracery. Our PA 2500 R integrated amplifier circumvents this danger: its basic circuit is the same as that of the PA 2000 R, and even the circuit board layouts are identical. However, its heat-sinks are twice the size, and the case accommodates two of our new high-performance mains power supply units, with the result that it can deliver more than 280 Watts of continuous power per channel into 4 Ohms loudspeakers. The amplifier is therefore effortlessly capable of controlling speakers which are extremely critical in terms of phase and impedance. The PA 2500 is even more powerful than the smaller machine, but retains exactly the same dynamism and cultured sound.

Specifications

Pre-amplifier stage

Frequency response + 0 / − 3 dB 0,5 Hz – 300 kHz
Signal / noise ratio, unweighted / A-weighted 105 / 109 dB
Total harmonic distortion/Intermodulation < 0,001 % / < 0,001 %
Channel separation > 90 dB
Loudness Switchable, variable to suit loudspeaker efficiency
Tone controls Switchable, channel-separate
Bass −6 … +8 dB
Treble −6 … +8 dB
Nominal input sensitivity
High level (RCA) 4 × 250 mV … 4 Veff/20 kOhms
Balanced (XLR) 3 × 500 mV … 8 Veff/5 kOhms
Phono-MM (optional*) 1 – 5 mV,
*Phono module replaces one high-level input 16 Capacitances
Phono-MC (optional*) 60 – 1000 µV,
*Phono module replaces one high-level input 16 Impedances

Outputs

Headphone 50 Ohms
PRE out RCA  Nom 1 Veff, Max 9,5 Veff, 75 Ohms
PRE out XLR  Nom 1,45 Veff, Max 19,6 Veff, 75 Ohms

Output stage

Nominal output per channel
into 8 Ohms 140 Watts
into 4 Ohms 280 Watts
into 2 Ohms 560 Watts
Frequency response + 0/– 3 dB 1 Hz – 150 kHz
Slew rate 60 V/µs
Damping factor > 65
Total harmonic distortion < 0,02 %
Reservoir capacity 120000 µF

Mains / Accessories / Dimensions

Control interface R2-Link
Remote control FM 2000
Mains connection 100 – 120 V or 200 – 240 V, 50 – 60 Hz
Max. 2000 Watt
Standby < 0,5 W
Additional features Trigger input +5V … 20V via adapter plug for remote power-on
Input 3 (symmetrical) or 5 (asymmetrical) can be configured as Surround Pass Through
Dimensions (H x W x D) 16,5 × 46 × 40,5 cm
Weight 14,5 kg
Finishes
Silver anodised aluminium (43), black anodised aluminium (42), brushed
Technical modifications reserved

Data sheet

T+A
PA 2500 R
Type :
Integrated Amplifier
Output power per channel
into 2 Ohms 560 Watts into 4 Ohms 280 Watts into 8 Ohms 140 Watts
Principle
Double mono with HV-Technology, 2 power supplies
Frequency response
1Hz–150kHz
Inputs
3x balanced (XLR) 4x high level (RCA)