Our webstore uses cookies to offer a better user experience and we recommend you to accept their use to fully enjoy your navigation.


On sale

All sale products
Blog navigation

Derniers messages

PA 2000 R

6 350,00 €

T+A PA 2000 R
Integrated Amplifier

Building neat, compact integrated amplifiers offering high output power and superb sound quality is an art at which T+A has no peer.

New product


The Integrated Amplifier

As proof of this claim we present the PA 2000 R integrated amplifier. It is incredibly dynamic, powerful and incisive. There are two reasons behind these characteristics: the extremely linear output stages with very low negative feedback, which are a completely new development, and the new form of mains power supply employed. We designed the latter specifically for audio devices, to ensure that they are ultra-stable under load, with no danger of collapse even when handling extremely high peak levels. The result is that the PA 2000 R can deliver a continuous power of more than 200 Watts per channel into 4 Ohms loudspeakers, enabling it to drive impedance-critical speakers whilst maintaining effortless control. Gas-tight gold-contact relays are employed to switch loudspeakers, inputs and internal signal circuits with total precision and zero losses. Separate tone controls are present for each channel, and they and the Loudness function can be by-passed completely. An optional audiophile phono pre-amplifier module for MM or MC can simply be plugged in. For operation in a surround system the amplifier can be set to Surround Pass Through mode, selected by a trigger signal.


Pre-amplifier stage

Frequency response + 0 / − 3 dB 0,5 Hz – 300 kHz
Signal:noise ratio, unweighted/A-weighted 105/109 dB
Total harmonic distortion/Intermodulation < 0,001 % / < 0,001 %
Channel separation > 90 dB
Loudness Switchable, variable to suit loudspeaker efficiency
Tone controls Switchable, channel-separate
Bass −6 … +8 dB
Treble −6 … +8 dB
Nominal input sensitivity
High level (RCA) 3 × 250 mV … 4 Veff/20 kOhms
Balanced (XLR) 3 × 500 mV … 8 Veff/5 kOhms
Phono-MM (optional*) 1 – 5 mV,
*Phono module replaces one high-level input 16 Capacitances
Phono-MC (optional*) 60 – 1000 µV, 
*Phono module replaces one high-level input 16 Impedances


Headphone 50 Ohms
PRE out RCA  Nom 1 Veff, Max 9,5 Veff, 75 Ohms

Output stage

Nominal output per channel
into 8 Ohms 100 Watts
into 4 Ohms 200 Watts
into 2 Ohms 300 Watts
Frequency response + 0/– 3 dB 1 Hz – 150 kHz
Slew rate 60 V/µs
Damping factor > 65
Total harmonic distortion < 0,02 %
Reservoir capacity 60000 µF

Mains / Accessories / Dimensions

Control interface R2-Link
Remote control FM 2000
Mains connection 100 – 120 V oder 200 – 240 V, 50 – 60 Hz
Max. 1000 Watts
Standby < 0,5 W
Additional features Trigger input +5V … 20V via adapter plug for remote power-on
Input 3 (symmetrical) or 5 (asymmetrical) can be configured as Surround Pass Through
Dimensions (H x W x D) 8,2 × 46 × 40 cm
Weight 10,5 kg
Silver anodised aluminium (43), black anodised aluminium (42), brushed
Technical modifications reserved

Data sheet

PA 2000 R
Type :
Integrated Amplifier
Double mono with HV-Technology
Frequency response
3x balanced (XLR) 3x high level (RCA)