Our webstore uses cookies to offer a better user experience and we recommend you to accept their use to fully enjoy your navigation.

close

On sale

All sale products
Blog navigation

Derniers messages

PA 3100 HV

15 900,00 €

Vidéo

PA 3100 HV
Integrated Amplifier

The PA 3100 HV is a further development of the PA 3000 HV, and most of its sub-assemblies are identical.

Condition
New product
Color

Share

The immediately obvious difference is the pair of VU meters in the front panel, which display the power generated per channel in logarithmic form in Watts into 4 Ohms. A revision of the pre-amplifier section (D.C. coupling) has brought an additional improvement in sound quality.
A further development is the redesigned analogue mains section and voltage power supply, which is similar to that of the A 3000 HV. This makes it possible to connect the supplementary PS 3000 HV mains section in order to gain a further increase in stability and performance of the power supply system as a whole. The additional unit provides an extra 1800 Watt of supply power, enabling the system to control even the most difficult loudspeakers without effort, so that they can unfold the best possible sound quality. 

As an option the PA 3000 HV and PA 3100 HV can also be fitted with High-End phono pre-amplifier modules which feature different circuit topologies to suit MM or MC systems. It is also possible to install the analogue signal processor module which has been developed for the P 3000 HV to provide channel-separate tone and loudness functions.
The all-metal F3001 infra-red remote control handset is supplied as standard.

Specifications

Pre-amplifier stage

Frequency response + 0 / – 3 dB 0,5 Hz –300 kHz
Signal / noise ratio 105 / 110 dB
Total harmonic distortion < 0,001%
Intermodulation < 0,001 %
Channel separation > 90 dB
Nominal input sensitivity High level (RCA) 7 x 250 mVeff ... 6 Veff / 20 kOhms
Nominal input sensitivity Balanced (XLR) 4 x 500 mVeff ... 12 Veff / 5 kOhms

Outputs

Headphones 50 Ohms
1 x Recorder 250 mVeff / 100 Ohms
PRE out RCA nom 1 Veff, max 9,5 Veff / 50 Ohms
PRE out XLR nom 1,45 Veff, max 19,6 Veff / 50 Ohms

Output stage

RMS output per channel into 8 Ohms 300 Watts
RMS output per channel into 4 Ohms 500 Watts
Peak output into 8 Ohms 380 Watts
Peak output into 4 Ohms 700 Watts
Power bandwith 1 Hz – 150 kHz
Frequency response + 0 / – 3 dB 0,5 Hz – 180 kHz
Slew rate 60 V/µs
Damping factor > 65
Signal / noise ratio > 115 dB
Total harmonic distortion < 0,03 %
Reservoir capacity 120000 µF

Mains / Accessories / Dimensions

Mains 110 V/60 Hz or 220/240 V/50 Hz
Standby < 0,5 W
Remote control F 3001
Features Trigger input +5 ... 20V for external switching-on
Input 4 can be configured in surround mode
(Surround pass-through)
connectivity for additional PS 3000 HV
LAN connector for home-automation systems
Dimensions (H x W x D) 17 x 46 x 46 cm
Weight 38 kg
Finishes Case: silver laquer 47 or titanium laquer 64
Heat sink: black 42
Technical modifications reserved

Data sheet

T+A
PA 3100 HV
Type :
Integrated Amplifier
Frequency response
0,5 Hz – 300 kHz
Signal / noise ratio
105 / 110 dB
Inputs
4 x balanced (XLR) 7 x high level (RCA)
RMS output per channel
4 Ohms 500 Watts 8 Ohms 300 Watts
Features
VU-Meter for power output Power link connector for supplementary PS 3000 HV
  • Vidéo
  • Vidéo

    Cliquez sur une vignette pour charger la vidéo

    •  vidéo